Operation Manual

vax.co.uk
11
Steam exhaust vent. Remove cleaning pad and inspect
unit base for blockages. If a
blockage can be seen use a small
thin object such as a paper-clip to
try to free blockage.
Clearing blockages
IMPORTANT: Turn unit off. Allow unit to fully cool down before performing maintenance or troubleshooting checks.
There is a small opening on the back of the unit at the bottom of the grey trim. This opening is a steam exhaust
vent should the primary path become blocked. If steam starts to escape from this vent you should:
If steam path is still blocked,
remove screw on floorhead neck.
After floor head is removed, using
a thin object such as a paper-clip
(in the area shown), attempt to
remove the blockage.
Maintenance (Keep your Vax as good as new)