Operation Manual

-
Blue light = unit on
Green light = steam mop ready to use
No green light = water heating to max temperature (NOTE: You can still use your steam mop at this time)
If during use the green light switches off this means the steam mop is heating up to maximum temperature.
The green light will re-appear when it has heated back up to maximum temperature.
Operation
6
Vax Careline: (UK) 0844 412 8455
(ROI) 1-800 928 308
Steam cleaning hard floors
IMPORTANT: To reduce the risk of personal injury, unplug the steam mop when assembling the accessories.
NOTE: For 1 x 500ml water tank = 15 minutes steaming time (approx.).
Add detergent if required
NOTE: When the green light is off water is heating to max temperature.
Plug into mains and turn
on. Press power button in
and the
blue power
indicator light will
illuminate. Within approx 1
min of the unit being turned
on, the green steam ready
indicator will illuminate
when ready for use.
To recline the unit place
foot on floor head and tilt
handle backwards.
To produce steam
squeeze the trigger in
short bursts. To prevent
overly wetting floors, do
not hold down
contiuously.
M
o
ve t
h
e
st
eam
mo
p
slo
wly
back
war
d
s
an
d
f
o
rwar
d
s
acr
o
ss t
h
e
flo
o
r
pay
i
n
g
part
i
cular
at
t
en
t
i
o
n
t
o
h
i
gh
t
r
affi
c
ar
eas.
Squeeze/r
elease
t
ri
gger
as
r
eq
ui
r
ed
.
WARNING: Never leave the stick steam mop in one spot on any surface for an extended period of time with a damp or
wet pad attached as this may damage the floor surface.
WARNING: Do not operate/use stick steam mop without water in clean water tank.
12
IMPORTANT: Please refer to floor manufacturer’s care recommendations before use and test the steam mop on a
discrete area of flooring to begin with.