User guide

Run the hose to the
upper caddy and press
into hose clip #1 (See
illustration 1, Page 6).
Continue wrapping the
hose clockwise around
the tool caddies, pressing
the hose into the groove
on the bottom of the
lower tool caddy.
Run the hose back to the
upper caddy and press
into hose clip #2 (See
illustration 1, Page 6).
Lock the attachment end
of the hose into place by
pressing down onto the
post located on the right
side of the lower tool
caddy, until secure in
place.
Tool caddy use
5 6
7
8
7