User guide

www.vax.com.au

Operation

Powered brush roll and attachment

Emptying the dirt container

Push powered brushroll tool into hand

vac nozzle to attach. (Crevice tool

must NOT be extended)

NOTE: When unit is on, the brush roll

will be on.

NOTE: The powered brushroll has its own motor and a motor protective device; should debris jam the powered brushroll and

stop the powered brushroll from rotating, switch the unit Off, remove the powered brushroll from the unit, remove the debris

jamming the powered brushroll and assemble the powered brushroll attachment back on the unit.

To remove, pivot the rear of the

powered brushroll attachment

downward (A) until you hear a slight

click. Then pull the powered brushroll

forward (B) away from the dirt cup.

To open, press both buttons

either side of the dirt container

simultaneously.

Empty over a bin.