User guide

4
Vax Service line
AU: 1300 361 505 / NZ: 0800 800 900
Operation
Charging
Operating the appliance
Tools
NOTE: Use only the charger supplied by the manufacturer to recharge.
On/ Off Switch
OFF
ON
Power switch must be in the OFF position.
The indicator light will come on to indicate that the appliance is charging. The light
will not change when the unit is charged.
It is normal for the charger to become warm to touch when charging.
If the operating time gets shorter after repeated use, let the unit run until it slows down.
Recharge for 16 hours and repeat monthly for best results..
NOTE: Crevice tool is retractable
A crevice tool is built-in to the nozzle and
can be extended by pulling the extension
piece until it locks into position.
The extension can be retracted by
depressing the arrow button near the front
of the nozzle and pushing the extension
back into the nozzle.
IMPORTANT: Before fi rst use, charge your unit for at least 16 hours.