Installation guide

3.6.5 Example: Changing the KFMSA Node ID with EVCXF
In dual- and tri-host systems, you must change the second
host system’s ID to 6, and the third host system’s KFMSA ID
to 5. If you have a multi-host I/O panel, change the IDs using
the KFMSA node select knob (see Figure 3–16). Otherwise,
use EVCXF (see Example 3–4).
Example 3–4: Changing KFMSA Node ID with EVCXF
[Continuing from Example 3-3, EVCXF is still running.]
DS> ! VAX/DS prompt returns
DS> SET NODEID XMI NODE 5, DSSI BUS 1, NEW DSSI NODE ID 6
DS> SET NODEID XMI NODE 5, DSSI BUS 2, NEW DSSI NODE ID 6
3–40 VAX 6000 Series Installation Guide