Installation guide

3.6 Configure DSSI Subsystem with EVCXF
To configure the ISE devices in software, run VAX/DS,
the autosizer, and the EVCXF diagnostic. This must be
completed before any CI VAXcluster installation. See
Figure 3–15.
Figure 3–15: Verification of the KFMSA
KFMSA
in system
msb-0684B-91
No
Yes
2
Run Autosizer
Go to
Section
8.9
Boot VAX/DS
3
Run EVCXF
1
Power Up System.
Self-Test Runs.
3–30 VAX 6000 Series Installation Guide