Installation guide

Appendix A Digital Remote Services Console Installation

Appendix B Module Handling

B.1 Handling Modules . . . .............................. B–2

B.2 Inserting Modules . . . .............................. B–4

Appendix C Installing an Expander Cabinet

C.1 Prepare the Cabinets . .............................. C–2

C.2 Join the Cabinets .................................. C–4

C.3 Install the DWMBB/A Module and Connect the

XMI-to-VAXBI Adapter Cables . . ...................... C–6

C.4 Connect the DEC Power Bus Cable .................... C–8

C.5 DWMBB Cabling .................................. C–10

Appendix D DSSI Conﬁguration Sheets

Index

Examples

3–1 Running Standalone VAX/DS . . . ...................... 3–32

3–2 Running the Autosizer .............................. 3–34

3–3 Running EVCXF .................................. 3–36

3–4 Changing KFMSA Node ID with EVCXF . . . ............. 3–40

7–1 Self-Test Results .................................. 7–4

7–2 Self-Test Results: TYP, STF, and XBI Lines . ............. 7–6

8–1 Self-Test and SHOW CONFIGURATION . . . ............. 8–6

8–2 TK ROM-Based Diagnostic .......................... 8–10

8–3 Boot VAX/DS from a CD Server . ...................... 8–14

8–4 Boot VAX/DS from a CD Server, continued . ............. 8–16

8–5 Booting the VAX Diagnostic Supervisor from Tape . . . ..... 8–18

8–6 Running the Multiprocessor Diagnostic ................. 8–20

8–7 Setting the Default Boot Device . ...................... 8–22