Installation guide

Use the following procedure to unpack the system cabinet.
1. Cut the shipping straps from the carton.
2. Remove the top cap.
3. Using a 7/16 inch wrench, remove the four screws and metal closures
that hold the carton together.
4. Remove the ramp kit from the front of the cabinet and open it. See
Figure 2–2, .
5. Remove the loose piece box from the rear of the cabinet and open it.
Use the packing slip to inventory the items in the box. See .
6. Remove the inner cap. See .
7. Remove the plastic bag. See .
8. Remove the two control panel keys. The keys are tie-wrapped to the
cabinet’s rear grill.
Unpacking 2–7