Installation guide

Index
A
AC input voltage, 1–10
AC power cable, 1–12
Adapters, 4–1 to 4–3
Autosizer, 3–34 to 3–35, 8–20
B
BNCIA cables, 4–24
Booting from a CD server, 8–14,
8–17
Booting from a TF tape, 8–18
Booting from a TK tape, 8–18
Booting VAX/DS, 8–12, 8–19
for Models 300 and 400, 8–14
from a CD server, 8–13
from a TK tape, 8–13
Boot time, 4–12
C
Cabinet specifications, 1–9
Cabling to a disk subsystem, 3–22
to 3–23, 3–26 to 3–27
SA600 cabinet, 5–6
SDI cables, 5–6
Cabling to a tape subsystem, 3–22
to 3–23, 3–26 to 3–27
H9643 cabinet, 5–4
CD server, 8–3
loading, 8–13
CIBCA adapter, 3–5, 4–3
CIBCA controller module, 4–21
CI compared with DSSI, 3–6 to 3–7
CI port address, 4–8
Circuit breaker, 6–2
operation, 6–3
CIXCD adapter, 3–5, 4–3
Cluster size, 4–16
Connecting the console terminal,
2–12 to 2–13
setting console terminal
characteristics, 2–13
Connecting to an Ethernet, 2–14 to
2–15
Connecting to FDDI, 2–16 to 2–17
Console commands
INITIALIZE, 8–6
SAVE EEPROM, 8–24
SET BOOT, 8–22
SHOW ALL, 8–24
SHOW CONFIGURATION, 8–6,
8–10, 8–22
and self-test results, 7–7
SHOW FIELD, 8–24
Console load device, 8–2 to 8–3
and CSA1, 8–12
and DEBNI, 8–8
and DEMNA, 8–8
loopback test, 8–8
TF tape, 8–10
TK tape, 8–10
T/R, 8–10
verify Ethernet adapter, 8–8
verify path, 8–8
Console terminal characteristics,
2–13
Control panel, 6–10 to 6–17
keys, 2–7
lower key switch, 6–12
Restart button, 6–14
status indicator lights, 6–16
upper key switch, 6–12
CSA1, 8–12
Index–1