Installation guide

Appendix D

DSSI Conﬁguration Sheets

Each component in the DSSI subsystem has an address. Part of the

address is determined by the physical location of the component in the

DSSI subsystem, and part of the address is set during the KFMSA module

installation. Use a conﬁguration sheet when you are setting parameters

(see Chapter 3).

The next two ﬁgures are intended for your use as DSSI conﬁguration sheets,

in case you do not have one with your installation information from the

integrated storage elements (ISE). Chapter 3 describes the procedures for

using the conﬁguration sheets.

DSSI Conﬁguration Sheets D–1