Installation guide

Run the standalone autosizer (EVSBA); then you do not need to attach
each processor explicitly.
Issuing a SET TRACE command generates a more detailed printout of
the multiprocessor test.
Issue the SELECT ALL command to test all processors in the system.
Run the multiprocessor test which tests the interprocessor interrupts
and cache functions for the model number of the system. You only have
to run the multiprocessor test once; it’s not necessary to change boot
processors.
Exit VAX/DS.
Table 8–3: Multiprocessor File Names
Model Number
1
File Name
Model 400 ERKMP
Model 300 ELKMP
1
Model 500 and 600 systems run the multiprocessor test as part of the system self-
test; does not need to be separately invoked.
For additional information on these tests, see the VAX 6000 Models 300
and 400 Service Manual.
Verification 8–21