Installation guide

8.5 Boot Commands for Verification
For TK or TF booting, use BOOT CSA1. For CD server
booting, use the BOOT commands shown in Figure 8–4.
Table 8–1: BOOT Commands for VAX/DS
Adapter Models 500 and 600 Models 300 and 400
TBK70 BOOT /R5:10 CSA1 BOOT /R5:10 CSA1
KFMSA
(for TF)
BOOT /R5:10 CSA1 BOOT /R5:10 CSA1
DEMFA BOOT /R5:10 /XMI:m /FILENAME:ISL_
LVAX_x FX0
BOOT /R5:110 /XMI:m FX0
DEMNA BOOT /R5:10 /XMI:m /FILENAME:ISL_
LVAX_x EX0
1
BOOT /R5:110 /XMI:m EX0
DEBNI BOOT/R5:10/XMI:m/FILENAME:ISL_
LVAX_x/BI:n ET0
1
BOOT /R5:110 /XMI:m /BI:n ET0
1
Where x is the version letter.
Figure 8–4: CD Server BOOT Commands for VAX/DS
BOOT /XMI:m
msb-0441E-91
/R5:10 /FILENAME:ISL_LVAX_x
R5:110
EX0
/BI:n ET0
FX0
Model 500/600
Models 300/400
DEMFA
DEBNI
DEMNA
DEBNI
ISL_LVAX_x
/BI:n ET0
EX0
DEMNA
8–12 VAX 6000 Series Installation Guide