Installation guide

8.4.2 Run ROM-Based Diagnostics for the Tape
If you have a TF tape, verify the console load path to the
TF in the system cabinet or the TF857 in the SF2xx cabinet
using EVCXF (see Section 3.6). If you have a TK tape, use
the Z command to "attach" to the TK controller. Run a
ROM-based test to verify that the load path works properly.
Return the console to the boot processor.
Example 8–2: TK ROM-Based Diagnostic
>>> SHOW CONFIGURATION
Type Rev
1+ KA66A (8087) 0001
2+ KA66A (8087) 0001
3+ KA66A (8087) 0001
4+ KA66A (8087) 0001
6+ MS65A (4001) 0084
7+ MS65A (4001) 0084
8+ MS65A (4001) 0084
9+ MS65A (4001) 0084
D+ DEMNA (0C03) 0600
E+ DWMBB/A (2002) 0001
XBI E
1+ DWMBB/B (2002) 0001
2+ CIBCA (0108) 41C1
4+ TBK70 (410B) 0307
>>> Z/BI:4 E
?0033 Z connection successfully started.
T/R
RBD4> D2/TR/T=6/C
;T1035_TK 1.00
;T06
;P
6 410B 00000001
;00000000 00000000 00000000 00000000 00000000 00000000 00000000
RBD4> QUIT
^P
?0031 Z connection terminated by ^P
>>>
8–10 VAX 6000 Series Installation Guide