Installation guide

Your system must have at least one of the console load devices. If the
system has an in-cabinet tape drive, it is in the upper left front of the
system cabinet. A TF857 tape loader in an SF2xx cabinet can be connected
by the KFMSA adapter.
To locate an InfoServer compact disk server (with one or two CD drives),
ask the system manager for the location of the nearest CD server. If no CD
server is installed and the system does not have a tape drive, stop here and
install one of these console load devices.
If you are using a CD server for verification, use the diagnostic CD-ROM
with the following part number:
AG-PDWW*-RE - VAX 6000 CMPLT DIAG CD-ROM
^
|
+---- Revision letter in this position
(initial revision=A)
If you are using a TF or TK tape drive for verification, use the diagnostic
tape with the following part number:
AQ-PDWX*-DE - VAX 6000 CMPLT DIAG TK50
^
|
+---- Revision letter in this position
(initial revision=A)
Verification 8–3