Installation guide

Chapter 7
System Self-Test
On power-up, the system runs an automatic self-test. Self-test results are
indicated by module LEDs, the self-test display at the console terminal,
and the Fault light on the control panel.
CAUTION: Take extreme care when handling modules. You must wear the
antistatic wrist strap attached to the cabinet when you handle any modules.
See Appendix B.
Sections in this chapter include:
• Enable the System and Check Status LEDs
• Check the Self-Test Display
• Sample Self-Test Display with VAXBI Adapter
System Self-Test 7–1