Installation guide

Chapter 5
Connecting to Tapes and Disks
VAX 6000 systems connect to tape and disk drives using several adapters.
This chapter describes connecting to tape or disk using the TBK70, KDB50,
KDM70, and KLESI-B adapters. For information on connecting a DSSI
subsystem using a KFMSA adapter, see Chapter 3, and for connecting to a
CI VAXcluster, see Chapter 4.
Sections in this chapter include:
• Architecture
• Cabling TU Tape Drives
• Cabling RA Disk or TA Tape Drives
Connecting to Tapes and Disks 5–1