Installation guide

This procedure applies to all VAX 6000 systems. It does not change if the
adapter is in the XMI card cage or the VAXBI card cage.
At the rear of the system cabinet:
1. Open the door.
2. Attach the cables to the VAXcluster port by hand. Screw the TNC type
connectors into the receptacles and label the cables.
3. Route the cables to the SC008. See the SC008 Star Coupler User’s
Guide for cable installation instructions.
BNCIA cables can be ordered in three lengths:
BNCIA-10 (32 feet)
BNCIA-20 (65 feet)
BNCIA-45 (145 feet)
Connecting to a CI VAXcluster 4–25