User's Guide

support.vax.co.uk

GETTING STARTED

CHARGING THE BATTERY

Slide the battery down on to the charger. The charger light will flash white to

show when the battery is charging.

The light on the charger will stop

flashing and go off when the battery

is fully charged.

Once fully charged, slide the battery off

the charger to remove.

To check the battery charge

level press the battery symbol.

THIS MACHINE IS ONLY TO BE USED WITH VAX ONEPWR BATTERIES AND CHARGER.

PLEASE READ THE SAFETY GUIDE BEFORE USE.

NOTE: Before first use, ensure the battery is fully charged. Failure to fully charge the battery

before first use may result in poor battery performance. The life expectancy of the battery will vary

depending on the usage of the machine.

OPERATION

WARNING: The brushbar in the powered floorhead constantly rotates when switched on. Never use

the powered floorhead on one spot for an extended period of time as the brushbar may damage the

floor surface. Always turn the powered floorhead brushbar off when cleaning hard floors. To prevent

any damage being sustained, test on an inconspicuous area of the flooring first.

Place your foot on the powered floorhead.

Pull the handle backwards to recline.

To remove the battery press both the

buttons to release.

Slide the battery into the handheld until

it clicks into place.