Operation Manual

---
8
Vax Careline
0870 606 1248
FAQs
!
WARNING: to reduce the risk of personal injury, unplug the vacuum cleaner
before performing maintenance/troubleshooting checks.
Is there an accessory missing?
• Check the ‘Machine Overview’ page in this guide
to make sure the part is definitely included in your
unit.
•
If it is missing, we’re here to help. Simply call us on
0
870 606 1248
Why won’t the vacuum cleaner pick up?
• The filters may be clogged: Refer to the
Maintenance sections (Page 6).
• The Dirt Container is full or blocked: Refer to
the Maintenance sections (Page 6).
• The Dirt Container may be incorrectly installed:
Refer to the Maintenance sections (Page 6).
• The brushbar may be blocked. Refer to the
maintenance section (Page 7).
Why is dust escaping from the vacuum?
• The filters may not be installed correctly. Refer to the
Maintenance sections (Page 6).
• The Dirt container may be incorrectly installed:
Remove the Dirt Container from the unit by
pressing the Dirt Container Release Button (Page
6) and reattach it to the unit, ensuring it is locked
firmly back into place.
• The filters may be clogged: Refer to the
Maintenance sections (Page 6).
What do I do if an accessory/the unit becomes
damaged or broken?
• Visit www.vax.co.uk for parts and spares.
• Please call our Vax careline to purchase new
spares or order a replacement:
0870 606 1248
Why won’t the accessories pick up properly?
• The accessory may be blocked: Refer to the
Maintanance section (Page 7).
•
The accessory may be faulty: call our
V
ax Careline to order a replacement:
0
870 606 1248
Why will the vacuum cleaner not run?
• It may not be plugged into the electrical outlet
correctly. Ensure that the plug is pushed into the
electrical outlet securely.
• The electrical outlet may not be working. Check the
fuse or breaker and consult an electrician.
• The motor Thermostat may have tripped. Switch
off and unplug the vacuum cleaner. Leave for one
hour before switching the vacuum cleaner back
on.
Why isn’t my brushbar rotating?
• The brushbar may not be turned on. Refer to the
operation section (Page 7).
• The unit may not be reclined. Refer to the
operation section (Page 4).
• The brushbar may be jammed. Refer to the
maintenance section for how to reset the brushbar
(Page 7).
Why is there a red light on the nozzle?
• The brushbar may be jammed. Refer to the
maintenance section for how to reset the brushbar
(Page 7).
• If the red light still shows, we’re here to help.
Simply call us on 0870 606 1248
Don’t take your machine
back to the shop, simply
contact us
U91-MA Mach Air Series User Guide.qxd:User guide 9/7/09 09:54 Page 8