User guide

89
programming key functions
Programming
E. The Display will show:
F. Cycle the UPPER ICON CHOICE Key to
select the coin station to be programmed.
G. Cycle the DOWN ARROW Icon Key
( ) to select the coin parameter to be
changed.
H. Cycle the RIGHT ARROW Icon Key
( ) to highlight the option you wish to
select for the chosen coin station.
I. To change the coin value or coin label for
printouts, cycle the UP DIGIT Icon Key
(Digit ) or DOWN DIGIT Ic on Key
(Digit ) to change the highlighted digit.
J. To select what type of coin is to be
sorted, choose the second selection as
follows:
COIN -- Has denominational value and adds
to Batch and Grand Totals.
TOKEN -- Coin label will be of the #XXXXX
type, there will only be a unit value and it will
not add to the Batch or Grand totals.
ENTER COIN VALUE: .50
SELECT COIN TYPE:
COIN TOKEN TOK / VAL DISABLE
SELECT DECIMAL POINT LOCATION:
0 0. .0 .00 .000
COIN DEBOUNCE TIME: 1234
FIGURE #176
COIN PROGRAMMING SCREEN
DIGIT
DIGIT
SELECTION OF THE COIN DEBOUNCE SET-
TING SHOULD ONLY BE PERFORMED BY
YOUR AUTHORIZED SERVICE TECHNICIAN.
IT IS NOT AN OPERATOR--SETABLE OR
CHANGEABLE FEATURE.