User guide

79
programming key functions
Programming
5. CONVERSION FACTOR
A. Turn Keyswitch to the unlock position.
Introduction: Internationally , this feature
allows the coinage from those countries par-
ticipating in the Euro coin conversion pro-
gram a method of calculating the value of
existing coins compared to the new Euro
coins.
Domestically, this feature allows the coin
processing entity (bank, savings/loan, etc.)
to charge a percentage of the total amount
processed as a processing / handling fee.
B. Hold UPPER ICON SELECT Key on
Control down, and switch the Sorter
Power Switch to ON.
C. The Display will show:
D. Press the PRINTOUT Icon Key ( ).
FIGURE #164
HOME PROGRAMMING SCREEN
NEXT
RS232
PAGE
PROGRAMMING MODE
$.00
1234
.,
/
Note: To enable the Conversion Factor Fea-
ture, “PRINT UNIT COUNT” (FIGURE #151)
must be enabled.
Note: If Euro Conversion Factor is “1”, the
total euro lines on the printer tape are not
printed (see FIGURE #167 and
FIGURE #168).