User guide

62
initializing the control for external printer operation
Programming
I. Cycle the DOWN ARROW Icon Key
( ) until the PRINTER Icon is selected.
J. Press the YES Icon Key.
K. Turn the Sorter Keyswitch to the lock
position.
Note: If a batch or grand total is accepted
and the printer has not been initialized, the
printer tape may not advance far enough for
proper tear--off. Initialize the printer (steps
A--K above).
PORT SETTINGS FOR OTHER EXTERNAL PRINTERS:
CITIZEN IDP 3550 / 3540
BAUD = 9600
DATA BITS = 8
PARITY = NONE
RTS / CTS = ENABLED
FORMAT = OPTION 3
ACK / NAK = DISABLED
PORT 4 PRINTER = NO
(SEE FIGURE #145)