User guide

56
initializing the control for internal printer operation
Programming
The Sorter must be “told” that the Printer is
installed, so that the proper communication link
can be established.
Note: If a batch, sub or grand total is ac-
cepted and the printer has not been initial-
ized, the printer tape may not advance far
enough for proper tear--off.
Note: The Sorter must be in programming
mode. To enter the programming mode, per-
form the following steps:
A. Turn Sorter Keyswitch to the unlock posi-
tion.
B. Hold UPPER ICON SELECT Key down
while turning Sorter ON.
C. The Display will show:
D. Press the NEXT PAGE Icon Key.
FIGURE #138
HOME PROGRAMMING SCREEN
NEXT
RS232
PAGE
PROGRAMMING MODE
$.00
1234
.,
/