User guide

54
default settings
Programming
4. GRAND PRINT LENGTH / NUMBER OF
COPIES
Long printout with 1 copy
5. RS--232 COMMUNICATION PORT
P ARAMETERS
Port #1
9600 Baud
No Parity
7DataBits
Printer Format
No Handshaking
No ACK NAK
Port #2
Same as Port #1
Port #3
Same as Port #1
Port #
4
Same as Port #1
6. PRINT ORDER (VALUE / SIZE)
Value
7. BAGSTOPS (Enable / Disable)
Enable
8. RUN / AUTO--STOP
Stop after 7 seconds
9. BAGSTOP DISPLAY (units or dollars)
Dollars
10.BAGSTOP VALUES
As shown in FIGURE #137
11 COIN VALUES
As shown in FIGURE #137
Note: Counting stations will be programmed
to specific values / quantities at production if
specified. If none are specified the values /
quantities will be programmed as shown in
the following chart:
12 CLEAR GRAND / GRAND AND PARTIAL
TOTALS
Grand Clear will only clear Grand Totals.