User guide

53
default settings
Programming
The Sorter is set when manufactured to the
following default parameters. Each of the
parameters may be changed to fit your specific
application.
To enter the Programming Mode: 1) Turn
Keyswitch to the unlock position. 2) Hold the
UPPER ICON SELECT Key down at power--up.
Press the NEXT PAGE Icon Key to cycle
through the programming mode, following the
instructions on the Display to change the default
settings. Once completed, turn the Keyswitch to
the lock position.
DEFAULT SETTINGS
1. SUPERVISOR CONTROL KEYS
All keys are active.
2. DISPLAY DECIMAL POINT / COMMA
(CHOICE AND LOCATION)
Decimal point in position .00
3. BATCH PRINT LENGTH / NUMBER OF
COPIES
Long printout with 1 copy
FIGURE #136
HOME PROGRAMMING SCREEN
NEXT
RS232
PAGE
PROGRAMMING MODE
$.00
1234
.,
/