User guide

48
clean sensor
Operator display messages
An object has blocked a Coin Sensor.
Disconnect the Sorter from power (the bat-
tery back--up circuitry will protect the coin
totals). Locate and clean the dirty Sensor,
reconnect the Sorter to power and resume
operation as shown in FIGURE #131.
Note: When the Clean Sensor Error has
been corrected, the coin quantity for that
station should be re--run to verify its
accuracy.
Note: Proper cleaning procedures are
discussed later in this guide.
--CLEAN INDICATED SENSOR
CLEAN SENSOR .50
--PRESS MOTOR OR HOME
--VERIFY BAG COUNTS AND BATCH TOTAL
TO RESUME OPERATION
FIGURE #131
CLEAN SENSOR