User guide

43
changing the bagstop quantity (not at bagstop)
Operating the sorter
Bagstop quantities may be set (reset) at any
time the sorter is at rest (no counting / sorting).
1. Press the MOTOR ON / OFF Key on the
Control to stop the Sorting Motor.
2. Press the direct access BAGSTOP Icon Key
( ). The Display will show the bagstop
settings for all coins.
3. Cycle the bagstop (left) DOWN ARROW
Icon Key ( ) to highlight the desired coin
value.
4. Cycle the RIGHT DOWN ARROW Icon Key
( ) to select one of the three bagstop
choices listed.
Note: If quantities are changed during coin
processing, it is important that the number of
coins currently in the coin bag must be less
than the new bagstop quantity. Check (and
clear if necessary) the bag count quantity of
the selected coin before selecting the new
bagstop setting, then proceed as follows:
5. Press the HOME Icon Key ( ) to return
to the HOME SCREEN.
6. Press the MOTOR ON / OFF Key to start
the Sorting Motor.
FIGURE #127
BAGSTOP ENTRY SCREEN
.01 SELECT BAGSTOP CHOICE
.02
.05 STOP 1 10000
.10
.50 STOP 2 5000
1.00
10.00 STOP 3 250
20.00
50.00