User guide

6
FIGURE #94
COIN BAG INSTALLATION
coin bags / power cord
Installation
To install a Coin Bag, lift the appropriate Spout,
slip the Bag over the Spout, and, while holding
the bag tightly
around the top of the Spout, re-
turn the Spout to home position.
The Coin Bag must rest on the Stand Shelf to
support the weight of the coin. If, as the bag fills,
it begins to stretch and hang from the Bagging
Spout, the use of the optional Shelf Spacer will
be required for proper bag support.
Note: To prevent coin spillage, fold the coin
bag tops toward the front--center of the sort-
er when using the security doors.
Check the Power Cord supplied with the Sorter
to ensure compatibility with local requirements.
If a different plug connection is required, obtain
the correct Power Cord assembly locally.
Bag
Spout
Stand
Shelf
FIGURE #95
POWER CORD CONNECTION
Power Cord
Connection