User guide

Emptying and cleaning the dirt container
Remove dirt container
by pushing down the dirt
container release button and
lifting the dirt container.
Hold dirt container over a
bin and press dirt release
button to open, allowing dirt
to fall out.
Tap excess dirt from the lter. Rinse under a tap and leave to dry for 24 hours.
1
2
3
Hold the dirt container and
twist the lid anti-clockwise.
Lift the lid to reveal the
pre-motor lter.
Lift out the pre-motor lter.
T
A
P
4
MAX
40˚C
MAX
40˚C
5
24hr
6
Cleaning the pre-motor lter
vax.co.uk
5
Looking After Your Machine – Filters
WARNING: Always switch o and unplug the vacuum cleaner from the electrical socket before assembling, opening or emptying
the dirt container, or before connecting/disconnecting the attachments.
IMPORTANT: For best cleaning results lters require cleaning at least every three months. Do not use your vacuum cleaner
without all of the lters in place.
IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will
automatically turn the unit o. Please refer to the FAQs on page 7 for more information.