User`s guide

c. Remove TU58 tape cartridge #35 from TU58 tape drive o.
d. Insert TU58 tape cartridge #39, labeled V AX 725/730 IDe DIAG, into TU58 tape drive
o.
e. Use the RUN command to execute the diagnostic program ENRKA.EXE:
DS>RUN ENRKA
7. For the VAX-II /730 system with the UDA50 disk controller, perform the following steps to
define the hardware configuration
and execute EVRLA:
a. Use the
ATTACH command to define the hardware configuration as shown below:
DS>ATTACH DW730 HUB DWO
DS>ATTACH UDA50 DWO DUA 772150 154 5 a
For the
RA80/RA60 system:
DS>ATTACH RASa DUA DUAO
For the RA81/RA60 system:
DS>ATTACH RAGa DUA DJAO
or
DS>ATTACH RAS1 DUA DUAO
For the dual RA60 system:
DS>ATTACH RAGa DUA DJAO
or
DS>ATTACH RAGa DUA DJAO
For the RA80/TU80 system:
DS>ATTACH RAGa DUA DJA1
or
DS>ATTACH RASa DUA DUAO
For the RA8I /TU80 system:
DS>ATTACH RAS1-DUA DUAO
For the RA60/TU80 system:
DS>ATTACH RAGa DUA DJAO
5-7