Installation guide

Console Commands 3-39
3.25 Show Memory
The show memory command displays memory module informa-
tion.
Example 3-25 Show Memory Command
>>> show memory
Set Node Size Base Addr Intlv Position
--- ---- ---- --------- ----- --------
A 7 128M 000000000 2-Way 0
The show memory command syntax is:
sh[ow] m[emory]
In the above example, the memory module at node 7 is in a two-way sys-
tem interleave indicated by the first interleave set A. The total memory
size is 128 Mbytes. See the set interleave example in Section 3.18 for ad-
ditional information.
For more information:
Basic Troubleshooting
MS7AA Memory Technical Manual