Installation guide

3-36 Console Commands
3.22 Show Device
Displays device information for any disk/tape adapter or group of
adapters.
Example 3-22 Show Device Command
>>> show device kdm700
polling for units on kdm700, slot 12, xmi0
dua32.0.0.12.0 DUA32 RA70
dua34.0.0.12.0 DUA34 RA70
dua77.0.0.12.0 DUA77 RA70
The show device command syntax is:
sh[ow] dev[ice] [<dev_name>]
See Section 2.4 for information on how to learn device names in the sys-
tem. Show device with no <dev_name> gives all devices in the system.
<dev_name> can be any CIXCD, KDM70, or KFMSA (VAX 7000 only)
adapter name (wild-carding is allowed). For example, show device
cixcd* will display information on all CIXCD devices in the system.