Installation guide

Console Commands 3-35
3.21 Show Configuration
The show configuration command displays the last saved configu-
ration.
Example 3-21 Show Configuration Command
>>> show configuration # DEC 7000 example
Name Type Rev Mnemonic
LSB
0+ KN7AA (8001) 000B kn7aa0
6+ MS7AA (4000) 0000 ms7aa0
7+ MS7AA (4000) 0000 ms7aa1
8+ IOP (2000) 0006 iop0
C0 XMI xmi0
1+ DEMNA (0C03) 0802 demna0
4+ KDM70 (0C22) 1E11 kdm700
8+ DWLMA (102A) 0104 dwlma0
C1 XMI xmi1
6+ DEMNA (0C03) 0802 demna1
8+ DWLMA (102A) 0104 dwlma1
D+ KDM70 (0C22) 1E11 kdm701
E+ KZMSA (0C36) 413F kzmsa0
The show configuration command syntax is:
sh[ow] c[onfiguration] [-s]
The screen displays the system configuration, including the hardware de-
vice type, revision level, and mnemonic for each LSB and XMI node. -s dis-
plays the saved configuration (from the set configuration command).
See Section 2.4 for device mnemonic information.