Installation guide

3-32 Console Commands
3.19 Set Host
The set host command allows you to connect to another console or
service. The -dup option is used to invoke the DUP server on the
selected node.
Example 3-19 Set Host Command
1. >>> show configuration
Name Type Rev Mnemonic
LSB
0+ KA7AA (8002) 0000 ka7aa0
1+ MS7AA (4000) 0000 ms7aa0
7+ MS7AA (4000) 0000 ms7aa1
8+ IOP (2000) 0001 iop0
C0 XMI xmi0
8+ DWLMA (102A) 0104 dwlma0
C+ KDM70 (0C22) 1E11 kdm700
E+ DEMNA (0C03) 0802 demna0
>>> set host demna0
Connecting to remote node, ^Y to disconnect.
T/R # To begin RBDs on DEMNA
RBDE> # in Slot E.
2. >>> show device kdm700
polling for units on kdm700, slot 12, xmi0...
dua32.0.0.12.0 DUA32 RA70 # Use set host -dup to
dua34.0.0.12.0 DUA34 RA70 # connect to a KDM70
dua77.0.0.12.0 DUA77 RA70 # device.
>>> set host -dup dua32.0.0.12.0
dup: starting DIRECT on kdm70_a.0.0.12.0 ()
DIRECT 1 D Directory Utility
ILEXER 1 D InLine Exerciser
Task? # Select utility or
# exerciser.