Installation guide

Console Commands 3-11
3.7 Continue
The continue command resumes processing at the point where it
was interrupted by a Ctrl/P. Programs continue executing at the
address currently in the program counter of the processor.
Example 3-7 Continue Command
$ ^P # VAX 7000 example
# Stop processing on boot processor;
# processor enters console mode.
Console entry reason: ^P or Node Halt
Entry PC: 80805442 Entry PSL: 041F8200
# System responds with message; system
# has halted with 80805442 in the
# program counter (PC).
>>> # Console session begins
.#
.#
.#
>>> continue # Processor resumes at the address
# where processing was stopped by
# Ctrl/P. Here processing continues
# at address 80805442.