Installation guide

Console Commands 3-7
The cdp command syntax is:
cdp [-{a,i,n,o,u}] [-sn] [-sa <val>] [dssi_device]
where <val> is allclass or unitnum, and dssi_device is the DSSI device.
Table 3-1 summarizes the cdp command options. The cdp command per-
mits the modification of DSSI device parameters from the console without
explicit connection to a node’s DUP server. The parameters modified are
the DUP task parameters nodename, allclass, and unitnum.
Table 3-1 Cdp Command Options
Option Function
-a
Sets device allocation class, allclass.
-i
Selects interactive mode; sets all parameters.
-n
Sets device node name, nodename (up to 16 characters).
-o
Overrides warning messages.
-u
Sets device unit number, unitnum.
-sa
allclass
Sets allclass for all DSSI devices in the system to the
specified value.
-sn
Sets nodename to either RFhscn or TFhscn
h is the device hose number (0–3)
s is the device slot number (1–14)
c is the device channel number (0, 1)
n is the device node ID number (0–6)
-su
unitnum
Sets the starting unitnum for the first DSSI device in the
system to the specified value. Subsequent DSSI unit num-
bers are incremented from this base.