Installation guide

Console User Interface 2-9
Table 2-3 Environment Variables [Continued)
Variable Attribute Function
d_softerr
Volatile Determines action taken following a soft
error. Values are continue (default)
and halt. Applies only when using the
test command.
dump_dev
Non-
volatile
Complete device specification of the de-
vice to which operating system dumps
are written (if supported by the operat-
ing system). Default value is null.
enable_audit
Non-
volatile
If set to on (default), enables the genera-
tion of audit trail messages. If set to off,
audit trail messages are suppressed.
Console initialization sets this to on.
interleave
Non-
volatile
The memory interleave specification.
Value must be default, none, or an ex-
plicit interleave list. Default value is de-
fault.
language
Non-
volatile
Determines whether system displays
message numbers or message text in
English (default).