Installation guide

2-8 Console User Interface
Table 2-3 Environment Variables (Continued)
Variable Attribute Function
bootdef_dev
Non-
volatile
The default device or device list from
which booting is attempted when no device
name is specified by the boot command.
boot_file
Non-
volatile
The default file name used for the primary
bootstrap when no file name is specified by
the boot command, if appropriate.
boot_osflags
Non-
volatile
Additional parameters to be passed to the
system software during booting if none are
specified by the boot command with the
-flags qualifier.
boot_reset
Non-
volatile
Resets system and displays self-test re-
sults during booting. Default value is on.
cpu
Volatile Selects the current boot processor.
cpu_enabled
Non-
volatile
A bitmask indicating which processors are
enabled to run (leave console mode). De-
fault is 0xff.
cpu_primary
Non-
volatile
A bitmask indicating which processors are
enabled to become the next boot processor,
following the next reset. Default is 0xff.
d_harderr
Volatile Determines action taken following a hard
error. Values are halt (default) and con-
tinue. Applies only when using the test
command.
d_report
Volatile Determines level of information provided
by the diagnostic reports. Values are
summary (default) and full. Applies only
when using the test command.