User guide

Using your machine Using your machine
The mode selector allows you to choose
DRY VAC, WASH or WET PICKUP. For dry
debris pick up turn the dial to DRY VAC,
the brushes will not rotate
To wash hard oors turn
the dial to WASH, brushes
will automatically rotate. For
spills/wet pickup turn the dial
to WET PICKUP, the brushes
will not rotate
In WASH mode slowly move the
machine forward to arms length
squeezing the trigger to release
the solution. Release trigger and
pull back machine to pick up
Emptying the recovery tank
To remove recovery tank,
press down on release
button and pull
Remove recovery tank lid
to empty
Note: The recovery tank has an automatic shut o to prevent the tank from
overowing. If this is activated, the machine will not pick up and the sound of the
motor will change. The recovery tank will need to be emptied.
TIP
We recommend that the
recovery tank is emptied
after dry pick up and
before wet operation.
Using your machine
Using your machine
Push switch to turn machine
on, push switch again to turn
machine o
Step on release pedal to
recline machine
To move your machine from
room to room, put the handle
in the upright position and tilt
machine back on rear wheels
The machine can also be
moved by lifting the machine
using the carry handle on
the front
TIP
Brushes will only rotate
in WASH mode.