User guide

Operating your steamer
Plug in steamer and switch
on at the mains
After you plug in and switch
on your machine you will see
a blue LED which indicates
water is being heated. After
5 minutes a green LED will
indicate that your steamer is
ready to use
If you wish to clean with
steam alone, simply turn
the Detergent Control Dial
toOFF
Depress the trigger to release
steam/steam+detergent from
the nozzle
max
min
o
Before you begin cleaning
NOTE: Whilst in use do not recline unit more than 45 degrees.
IMPORTANT: After use, switch o the machine, compress the trigger to release all remaining steam.
Allowmachinetocoolforaminimumof10minutesbeforerellingorstoring.
NOTE:IfyouwishtocleanusingVaxSolution,
simply turn the Detergent Control Dial to
the desired setting. Now, when pressing the
Steam Trigger, the steam cleaner will release
the amount of solution that is indicated on the
Detergent Control Dial as well as steam.
Getting started Using your machine
Don’t use hot or boiling water to ll
water tank. Don’t open the water
tank lid when using the steamer. The
steamer is pressurised, don’t remove
thelidwhensteamerishot.Onlyll
the water tank when cool and don’t
overll the water or detergent tank.
WARNING