Instruction manual

5. Insert one (1) screw into the back of the handle
and tighten, making sure that the handle plug is
secure (Fig.3/5).
6. V-041 only: Clip the TurboTool™ on to the front
of the TurboTool™ caddy (Fig.3/6).
7. Wrap the hose around the back of the hose
caddy (Fig.3/7). Push the hose tube down into
the right side of the vacuum cleaner (Fig.3/7B).
2. To secure, insert two (2) screws into the front of
the back panel (Fig.3/2).
3. Place the upper handle on to the top of the
cleaner (Fig.3/3).
4. V-041 only: Push the handle plug on to the
front of the vacuum cleaner (Fig.3/4A).
V-042 only: Push the blanking plug on to the
front of the vacuum cleaner (Fig.3/4B).
4
Use & Function
Fig.3/5
Fig.3/2
Fig.3/6
Fig.3/7
Fig.3/3
Fig.3/4
A
B
A
B
Vax V-041/2 9th.qxd 2/23/05 12:34 PM Page 4