Parts List

PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Getting started
IMPORTANT: Flooring should be dry vacuumed thoroughly before washing.
Test for colourfastness – Wet a white absorbent cloth with the solution. In a small hidden area of your carpet/rugs/
upholstery gently rub with the dampened cloth. Wait ten minutes and check for colour removal or bleed with a white
paper towel or cloth. If your carpet has more than one colour, check all colours.
Test your carpet/rugs/upholstery – Run the carpet washer over a small hidden area. If no pile distortion occurs continue
cleaning. When cleaning an entire room, move furniture out of the area to be cleaned. If the furniture cannot be moved, place
aluminium foil or wax paper under the legs. This will prevent wood nishes from staining your carpet. Pin up furniture skirts
and curtains.
When using the carpet washer, basic safety precautions should always be observed and don’t over saturate your carpets.
Only use Vax carpet solution. Using other solutions may cause excess foaming and will invalidate your guarantee.
The clean water tank should only be lled with warm water (max 40�C). Filling the clean water tank with hot/boiling
water will damage your machine and invalidate the guarantee.
This is a powerful carpet washer. Before plugging in make sure all controls are turned o. Hold carpet washer rmly
when starting and during use.
Assembling your carpet washer
Stand the base of the carpet
washer on the oor in the upright
position. Line up the handle with the
main body and push into place.
Turn handle lock dial clockwise
to lock into position.
Assemble the tanks by tilting and
lining up the front of the tank with
the washer and pushing the tank
back until it clicks into place.