Parts List
Getting in touchWhat to do if it goes wrongWhat to do if it goes wrong
• Check the contents panel on the box to make sure the part is denitely
included in your unit.
• The plug may not be fully pushed into the electrical socket.
• Check the fuse in the plug if this needs replacing, always replace with
a British 13amp fuse.
• The oat in the dirty water tank may have been activated. Empty the dirty water
tank and wait for the oat to settle before re-starting your carpet washer.
• The accessory hose connector cover has not been correctly closed.
Correctly close cover.
• Check the SpinScrub brushes and brushbar for blockages and clear.
• The dirty water tank may not be tted correctly. Re-t making sure
the lid is pushed down securely. Go to ‘Taking care of your machine’.
• Check the nozzle for blockages and clear. Go to ‘Taking care
of your machine’.
• Check the nozzle is correctly tted. Go to ‘Taking care of your machine’.
• Check the lter screen located in the dirty water tank for dirt and debris.
Go to 'Emptying the dirty water tank'.
• Make sure the clean water tank is tted securely. Go to ‘Using your machine’.
• Wash/Rinse dial has been set to 'Rinse'. Set dial to 'Wash' to dispense solution.
• The clean water tank valve may be stuck. Hold the clean water tank over the sink
and press the valve underneath to release.
• Squeeze the trigger on the handle to release solution and water mix.
• Water/solution tank is empty. Go to ‘Using your machine’ for how to rell.
• The brushes will only spin when the carpet washer is reclined.
• Check the SpinScrub brushes and brushbar for blockages and clear.
• Check for damage to the brushbar and the spindle on the back of the
SpinScrub brush.
SolutionProblem
Is there an
accessory missing?
Why won’t the carpet
washer turn on?
Why won’t the
solution/clean
water dispense?
Why won’t the
carpet washer
pick up?
Why won’t the
brushes spin?
CAUTION: To reduce the risk of personal injury, unplug the carpet washer before performing maintenance/
troubleshooting checks.