Parts List

Let’s talk technical
Undo the four screws on the side brushes.
Pull and slide the right side brushes together with
brushbar. Remove side cap from brushbar and unloop
brushbar from belt.
Loop replacement brushbar through the belt and onto
belt grip.
Pull and slide the left side brushes and remove side cap
from brushbar.
CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks.
Changing the brushbar
Lie carpet washer on its
back exposing SpinScrub
brushes and brushbar.
Using a crosshead
screwdriver, remove the
bottom screws from each
of the rug guards (metal
pins), so the bottom of the
pin is released. Unclip the
top of each to release.
Use a crosshead
screwdriver, undo 2
screws and remove
belt guard.
Firmly pull the sides
of SpinScrub cover
and remove SpinScrub
brushes.