Parts List

Taking care of your machine
Removing blockages from the brushbar and SpinScrub brushes
Remove both tanks and tilt
carpet washer back.
Lift nozzle release
clip and pull forward,
separating tabs on nozzle
and carpet washer.
Rinse nozzle under water
to remove dirt/debris.
Replace nozzle by lining
up tabs on nozzle with
tabs underneath front
of carpet washer. Push
nozzle down until it clicks
into place.
Removing and cleaning the nozzle
Using a pair of scissors
remove any threads or
hair caught around
the brushbar.
Using a crosshead
screwdriver remove the
bottom screws from each
of the rug guards (metal
pins) so the bottom of the
pin is released. Unclip the
top of each pin to release.
Firmly pull the sides
of the SpinScrub cover
to remove.
Line up spindle and tabs
on side of spin scrub
cover into carpet washer,
push rmly until it clicks
into place.