Parts List

Using your machine
Using the hose and tools (selected models only)
CAUTION: Test for colourfastness – Wet a white absorbent cloth with the solution. In a small hidden area of your carpet/
rugs/upholstery gently rub with the dampened cloth. Wait ten minutes and check for colour removal or bleed with a white
paper towel or cloth. If your carpet has more than one colour, check all colours.
Pour required amount of
carpet cleaning solution
into the solution tank.
Press trigger on hose to
release solution/water.
Push hose end and hose
solution connector into
connection port until it
clicks into place.
Fill the clean water tank
with warm water
(max 40�C).
Squeeze trigger on the forward stroke, release trigger
on backward stroke to recover solution/water. For a
dryer nish, follow with an additional dry stoke with
no trigger pressed.
Slide selected tool over tab at end of hose until
it clicks into place.
Pull down accessory hose
connector cover.
Turn wash/rinse dial
to ‘wash’.
Plug into mains and press
the On/O button to
switch on.
Use the carpet washer
or hose to pick up
spills before washing
and cleaning
the area.
TIP
NOTE: The carpet washer should be in the upright position when using the hose and tools; de-activating the SpinScrub
brushes and brushbar.