User guide

6vax.co.uk5
Looking After Your Machine
Emptying and cleaning the dirt container
Advanced cleaning
tap
1
2
WARNING: Always switch o and unplug the vacuum cleaner from the electrical socket before assembling, opening
or emptying the dirt container, or before connecting/disconnecting the attachments.
IMPORTANT: Cleaning lters maintains vacuum performance. Vax recommends that your lters should be checked
and cleaned periodically. If your lters are washable make sure that they are completely dry before inserting them
back into the vacuum cleaner.
Looking After Your Machine
Cleaning the post-motor lter
Cleaning the HEPA pre-motor lter
WARNING: Do not wash the post-motor lter.
IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat
will automatically turn the unit o. Should this occur, unplug the vacuum cleaner from the electrical socket and turn o
the switch. Remove and empty the dirt container. Check the hose for blockages. Clean the lters. Allow the unit to cool
for approximately one hour (if you have cleaned the lters you will need to wait twenty four hours for the lters to dry
before putting them back in the machine). To re-start the machine, plug it into an electrical socket and switch it back on.
tap
24hr
1
2
tap
40° C
max
!