User guide

ax Careline 0870 606 1248

clearing blockages

The post-motor filter may be rinsed in warm warter (max.

40°C). Allow to air dry for 24 hours before replacing.

NOTE: Do not use any detergents or boiling water to

wash the filters. Vax recommends cleaning the filter

every time you empty the dirt container. Vax recommends

washing the filter every 9-12 months.

Once completly dry, return the post-motor filter to the

vacuum cleaner. Replace the post-motor cover before

restarting the vacuum cleaner.

7. Cleaning Blockages

WARNING: To reduce the risk of electric shock, the

power cord must be disconnected before

performing maintenance/troubleshooting checks.

1. Turn the vacuum cleaner off and unplug from the

electrical outlet.

2. The flexible hose and stretch hose (C91-M4-S only)

can be disconnected from the vacuum cleaner by

turning the hose to the left and pulling away from

the machine. Remove any blockages found then

reconnect the hose securely.

Clearing debris from the TurboTool

Switch the vacuum cleaner off and disconnect the power

plug from the electrical outlet.

Press the latches on both sides of the tool and remove the

bottom plate (Fig.7/1).

Remove any blockage (Fig.7/2).

Fig.6/8

Fig.7/1

Fig.7/2

C91-M4 Series User Guide.qxd:Vax VZL-7015(AT) User Guide 23/3/09 10:19 Page 7