Specifications

3-22 888-2857-001 5/9/13
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
Platinum VAX-C Series
3.4.1 ISP (In-System Programming) Screen
See "5.2 PA Module Removal and Replacement" on page 5-2 for information regarding
updating software.
Figure 3-15 Xmtr Home>Exciter Home>Setup>ISP
Table 3-12 Xmtr Home>Exciter Home>Setup>ISP
Fields Explanation
File to Upload Enter name and location of file containing latest software. Filename
ending in .s19 must be entered. Settings files can also be entered here.
Browse Press button to locate file to upload.
Submit Uploads file to transmitter.
Reset Reboots software in exciter section after confirmation and takes
transmitter off-air for a few seconds during reboot. Press reset after
changing feature key to activate new features. Communication will be
lost during the reboot and login will be required after the reboot is
completed.
Are You Sure Press OK to load new software onto microprocessor.
Softkeys
Save Settings Opens a screen that contains coded settings. Settings can be stored to
computer or thumb drive for later restorations.
Exciter Home Displays Exciter Home screen.